D4SL-N2NFA-D

World's smallest Class 6-contact Guard Lock Safety-door Switch

<Guard Lock Safety-door Switch D4SL.N>

Wiring time is reduced with two types of wiringmethods capable of one-touch attachment andremoval.

A wide variety of built-in switches can be used forvarious devices.(4-,5-,and 6-contact models are available)

Key holding force of 1.300 N.

.It is possible to change the key insertion point

without detaching the head.

Sianificantly reduced solenoid current contributesto the reduction of power supply cost.

<Slide Key D4SL-NSK10-LK口>

.Lockout Key to prevent workers from becomingtrapped inside the hazardous area.

.The vertical D4SL Guard Lock Safety-door Switchcan be easily mounted on 40x40 mm aluminumframes.

.The plastic material makes the Slide Key suitablefor lightweight doors.

Model Number Legend Switch (Standard type)

Slide Key

Note:

1. The Door Switch is not included. Select the Door Switch depending on the necessary number of contacts and the conduit size. The contents are provided as a total set, individual contents cannot be ordered separately.

2. Perform risk assessment for the equipment in question, configure relay units and other safety circuits, and use properly.

*The inner lever for D4GL-SK10/D4SL-NSK10 that can not be used for other products and applications.

Applicable Door Switches

Features

The lockout key prevents workers from becoming trapped without using a padlock. Note: Using LEDs of D4SL-N enables confirming whether the door is open or closed and locked or unlocked.

Connection

nternal Circuit Diagram Without indicato

Circuit Connection Example

•Direct opening contacts used as safety-circuit input are indicated with the mark.

•Do not switch circuits for three or more standard loads at the same time. Doing so may adversely affect insulation performance.

•DC solenoids have polarity. (E1: Positive, E2: Negative) Confirm terminal polarity before wiring.